{"id":3082,"date":"2026-08-27T17:00:00","date_gmt":"2026-08-27T09:00:00","guid":{"rendered":"https:\/\/sourcingall.com\/?p=3082"},"modified":"2026-08-27T17:00:00","modified_gmt":"2026-08-27T09:00:00","slug":"what-to-ask-and-film-during-a-supplier-video-tour-a-minute-by-minute-checklist","status":"publish","type":"post","link":"https:\/\/sourcingall.com\/es\/supplier-verification\/what-to-ask-and-film-during-a-supplier-video-tour-a-minute-by-minute-checklist\/","title":{"rendered":"What to Ask and Film During a Supplier Video Tour: A Minute-by-Minute Checklist"},"content":{"rendered":"<p>If you ask a <a href=\"https:\/\/sourcingall.com\/es\/\">proveedor<\/a> for a live walkthrough, use a factory video tour checklist to focus the <a href=\"https:\/\/sourcingall.com\/es\/contact-us\/\">llamar<\/a> on verifiable evidence rather than a polished sales show. A focused checklist helps you stick to a 20 minute agenda that records entrance proof, production activity, QC checks, mold rooms, material stock, finishing, and packaging shots. Use the checklist to make sure each minute has a clear verification goal.<\/p>\n<p>Treat the recorded call as part of your due diligence pack to compare with business documents and prior communications. Ask for consent to record, note gaps, and use live prompts to confirm claims before placing a first order. A simple checklist reduces subjective judgment when scoring what you see.<\/p>\n<h2 id=\"table-of-contents\">Table of contents<\/h2>\n<ul>\n<li><a href=\"#what-is-a-20-minute-factory-video-tour-checklist-that-i-can-run\">What is a 20 minute factory video tour checklist that I can run?<\/a><\/li>\n<li><a href=\"#what-should-i-film-and-ask-at-the-entrance-and-reception\">What should I film and ask at the entrance and reception?<\/a><\/li>\n<li><a href=\"#what-shots-and-live-prompts-should-i-request-on-production-lines-and-machines\">What shots and live prompts should I request on production lines and machines?<\/a><\/li>\n<li><a href=\"#what-should-i-capture-in-finishing-packaging-and-storage-areas-using-the-factory-video-tour-checklist\">What should I capture in finishing, packaging, and storage areas using the factory video tour checklist?<\/a><\/li>\n<li><a href=\"#how-do-i-verify-quality-control-mold-rooms-and-traceability-on-a-live-call\">How do I verify quality control, mold rooms, and traceability on a live call?<\/a><\/li>\n<li><a href=\"#when-should-i-stop-the-call-and-log-a-red-flag\">When should I stop the call and log a red flag?<\/a><\/li>\n<li><a href=\"#how-should-you-score-a-factory-video-tour-checklist-after-the-call\">How should you score a factory video tour checklist after the call?<\/a><\/li>\n<li><a href=\"#what-can-a-factory-video-tour-checklist-verify-and-what-can-it-not-prove\">What can a factory video tour checklist verify, and what can it not prove?<\/a><\/li>\n<li><a href=\"#which-factory-video-tour-checklist-prompts-are-appropriate-on-a-live-call\">Which factory video tour checklist prompts are appropriate on a live call?<\/a><\/li>\n<li><a href=\"#how-should-you-use-a-factory-video-tour-checklist-scoring-table\">How should you use a factory video tour checklist scoring table?<\/a><\/li>\n<li><a href=\"#frequently-asked-questions\">Frequently asked questions<\/a><\/li>\n<li><a href=\"#related-reading\">Related reading<\/a><\/li>\n<li><a href=\"#references\">Referencias<\/a><\/li>\n<\/ul>\n<h2 id=\"what-is-a-20-minute-factory-video-tour-checklist-that-i-can-run\">What is a 20 minute factory video tour checklist that I can run?<\/h2>\n<p>Run a 20 minute call that assigns time by priority and ties each shot to a verification prompt. A minute by minute checklist keeps the supplier on task and gives you a clear record to score later.<\/p>\n<p>Below is an example minute by minute factory video tour checklist you can use on a first supplier video call. Keep the call lean. Start by confirming recording consent and the name and role of the person on camera. Ask the supplier to hold a phone or tablet in landscape orientation and to keep lighting and sound adequate. Note that a remote view does not replace an on site audit, but it helps you compare what the supplier says with what you see and with company records [1].<\/p>\n<p>20 minute example agenda<br \/>\n&#8211; 0:00 to 1:00 &#8211; Recording consent, names, and role confirmation. Ask who will lead each segment.<br \/>\n&#8211; 1:00 to 2:30 &#8211; Entrance signage and office reception. <a href=\"https:\/\/sourcingall.com\/es\/get-a-quote\/\">Request<\/a> a wide shot of the exterior gate, company name on signage, and the reception area.<br \/>\n&#8211; 2:30 to 6:30 &#8211; Production line walk. Film overall line flow then zoom to key machines that make your product.<br \/>\n&#8211; 6:30 to 8:00 &#8211; Machine serial numbers and nameplates. Request a close up of machine labels and a finger pointing to the serial number.<br \/>\n&#8211; 8:00 to 10:00 &#8211; Material stock and incoming goods. Show raw material pallets and supplier labels.<br \/>\n&#8211; 10:00 to 12:30 &#8211; Mold room or tooling area. Film mold storage, labeling, and recent mold tags.<br \/>\n&#8211; 12:30 to 15:00 &#8211; QC station in operation. Request a live measurement on a finished part and a view of inspection records.<br \/>\n&#8211; 15:00 to 17:00 &#8211; Finishing and assembly benches. Show assembly jigs and employee PPE.<br \/>\n&#8211; 17:00 to 18:30 &#8211; Packaging line and packaged sample. Ask to light box a packaged product or scan a barcode.<br \/>\n&#8211; 18:30 to 19:30 &#8211; Traceability paperwork. Request to see batch tickets, production orders, or labels that do not disclose customer private data.<br \/>\n&#8211; 19:30 to 20:00 &#8211; Final <a href=\"https:\/\/sourcingall.com\/es\/faqs\/\">preguntas<\/a>, confirm next steps, and agree a time for you to receive footage or photos.<\/p>\n<p>Use this checklist as a guide rather than a strict audit protocol. Remote checks are part of due diligence steps that should be cross referenced with documents and third party checks when risk is high [1] [2]. Record which items on the factory video tour checklist were seen and which were not.<\/p>\n<h2 id=\"what-should-i-film-and-ask-at-the-entrance-and-reception\">What should I film and ask at the entrance and reception?<\/h2>\n<p>Start by confirming identity and location with a short set of shots and live prompts. Beginning the call with the checklist items for the entrance saves time if the location does not match the paperwork.<\/p>\n<p>Entrance verification helps confirm the supplier operates at the claimed address. Use the factory video tour checklist to request a wide shot of the factory frontage, a close up of any business signage, and a look at the street number. Ask the person on camera to say the company name and address while filming the sign. Compare that <a href=\"https:\/\/sourcingall.com\/es\/articles\/\">informaci\u00f3n<\/a> against the supplier documents you already have [1].<\/p>\n<p>Live prompts to use at the entrance<br \/>\n&#8211; Please pan from the main gate to the reception desk while you say the company legal name and location.<br \/>\n&#8211; Show a close up of the sign and then the door where staff badges are issued.<br \/>\n&#8211; Can you read the business license date or number from the office display without revealing sensitive information?<\/p>\n<p>Red line: if the supplier refuses to show public frontage or insists on pre recorded clips with heavy editing, log this as a risk and move to confirm address via independent records. Mark that in your factory video tour checklist notes.<\/p>\n<h2 id=\"what-shots-and-live-prompts-should-i-request-on-production-lines-and-machines\">What shots and live prompts should I request on production lines and machines?<\/h2>\n<p>Get both context shots and machine level proof that ties to claims <a href=\"https:\/\/sourcingall.com\/es\/about-us\/\">acerca de<\/a> capacity and equipment. A clear machine verification plan in your checklist speeds the process.<\/p>\n<p>Start with a wide walk through the production floor to show worker density and line layout. Then ask for targeted close ups of machines that are relevant to your product. Use the factory video tour checklist to prompt for machine nameplates, serial numbers, and a demonstration of a short production run if safe and allowed.<\/p>\n<p>Live verification prompts for machines<br \/>\n&#8211; Please show the machine nameplate and the serial number and hold the camera steady for five seconds.<br \/>\n&#8211; Can you run the machine for 30 seconds at normal speed and then stop and show the output?<br \/>\n&#8211; Measure one finished piece live with a caliper and state the measurement aloud.<\/p>\n<p>The aim is to match what the supplier claims about processes and machines with observable facts. If the supplier provides machine serials or certificates, compare those to purchase invoices or maintenance logs if you can obtain them. Keep in mind that remote review informs risk, but cannot substitute for a formal on site certification where that is required [2]. Note each result on the factory video tour checklist.<\/p>\n<h2 id=\"what-should-i-capture-in-finishing-packaging-and-storage-areas-using-the-factory-video-tour-checklist\">What should I capture in finishing, packaging, and storage areas using the factory video tour checklist?<\/h2>\n<p>Capture both the process flow and evidence of product protection and labeling. Adding a few finishing checks to your factory video tour checklist will help you decide if packing meets your export needs.<\/p>\n<p>Finishing and packaging areas often reveal the practices used before shipment. Request a clear view of the finished goods staging area, a packaged sample, and labels or barcodes. Ask the supplier to stage one packaged item and to open one in front of the camera to show internal packing, inserts, and protection.<\/p>\n<p>Specific prompts for finishing and packaging<br \/>\n&#8211; Show a packaged carton and scan or read the carton label aloud.<br \/>\n&#8211; Open one packed unit while the camera focuses on inner protections and inserts.<br \/>\n&#8211; Show the palletizing area and ask how boxes are secured for export.<\/p>\n<p>For storage, ask to see raw material stock and how inventory is identified. That helps you check traceability claims and assess foreign object risks. Treat anything you cannot see as an information gap to be resolved before a large order. Record those gaps against the checklist.<\/p>\n<h2 id=\"how-do-i-verify-quality-control-mold-rooms-and-traceability-on-a-live-call\">How do I verify quality control, mold rooms, and traceability on a live call?<\/h2>\n<p>Verify procedures with live checks, not just static documents. A checklist entry focused on QC steps makes it easier to confirm the supplier follows stated inspection processes.<\/p>\n<p>Start at the QC station. Ask to see a current inspection sheet and a worker performing an inspection on a live item. Request a live measurement and ask the inspector to mark the same item with a temporary tag or clip while you observe. For mold rooms ask to see tool tags and recent mold changeover records. For traceability request to see batch labels or production orders that tie items to dates and raw material LOT numbers while respecting customer confidentiality.<\/p>\n<p>Use live prompts such as<br \/>\n&#8211; Please measure this sample with a caliper and state each measurement.<br \/>\n&#8211; Show the QC checklist for this batch and the inspector signing name and date.<br \/>\n&#8211; Film the mold ID on the tool and then a tag showing last run date.<\/p>\n<p>Remote audit <a href=\"https:\/\/sourcingall.com\/es\/services\/\">guidance<\/a> in a food safety context recommends combining live video with conversations about controls and traceability and then cross checking records after the call. These ideas apply to non food products as verification prompts while recognizing remote checks are not full certification [2]. Add the <a href=\"https:\/\/sourcingall.com\/es\/case-studies\/\">outcomes<\/a> to your factory video tour checklist to track follow up items.<\/p>\n<h2 id=\"when-should-i-stop-the-call-and-log-a-red-flag\">When should I stop the call and log a red flag?<\/h2>\n<p>Stop the call and escalate if the supplier obstructs verification or the evidence contradicts claims. An explicit stop rule in the factory video tour checklist keeps you safe and avoids wasted time.<\/p>\n<p>If the supplier refuses to allow recording after you have sought consent, or if shots are clearly edited or inconsistent, pause the call and request another appointment with a different staff member. Log a red flag when you see any of the following: different company names on signage versus documents, worker safety standards that create immediate risk, empty production lines with claims of high output, or refusal to show machine serials and nameplates when asked.<\/p>\n<p>Common red flags<br \/>\n&#8211; Edited pre recorded footage passed off as live.<br \/>\n&#8211; Inconsistent company name or address on signage and documents.<br \/>\n&#8211; No QC station visible when inspection claims exist.<br \/>\n&#8211; Mold storage unlabelled or missing for products claiming custom tooling.<\/p>\n<p>A red flag is an input. Use it to withhold a first large order or to require a small pilot order and third party checks. Note each red flag entry on the factory video tour checklist for decision support.<\/p>\n<h2 id=\"how-should-you-score-a-factory-video-tour-checklist-after-the-call\">How should you score a factory video tour checklist after the call?<\/h2>\n<p>Score the call to support an objective decision about next steps. The post-call phase is where the factory video tour checklist helps convert observations into a score.<\/p>\n<p>Below is a simple evaluation table you can use immediately after the call. Assign 2 points if the item is fully verified, 1 if partial, and 0 if not verified. Total scores help you decide between a pilot order, on site audit, or walk away.<\/p>\n<p>Evaluation scoring table<br \/>\n| Item checked | 2 = Verified | 1 = Partial | 0 = Not verified |<br \/>\n|&#8212;|&#8212;:|&#8212;:|&#8212;|<br \/>\n| Entrance signage | | | |<br \/>\n| Production line target machines | | | |<br \/>\n| Machine serials and nameplates | | | |<br \/>\n| Material stock labeling | | | |<br \/>\n| Mold\/tool identification | | | |<br \/>\n| QC in operation and records | | | |<br \/>\n| Packaging and packed sample | | | |<br \/>\n| Traceability paperwork | | | |<\/p>\n<p>Post-call decision matrix<br \/>\n&#8211; 14 to 16: Proceed to a pilot order and consider a scheduled on site audit.<br \/>\n&#8211; 8 to 13: Require follow up evidence, a small pilot order, and document based verification.<br \/>\n&#8211; 0 to 7: Do not place an order until issues are resolved or consider alternate suppliers.<\/p>\n<p>Use the factory video tour checklist scores along with document checks and any third party searches you can perform. Remote calls are a piece of evidence not the full record [1]. Keep the scored factory video tour checklist with your file for auditability.<\/p>\n<h2 id=\"what-can-a-factory-video-tour-checklist-verify-and-what-can-it-not-prove\">What can a factory video tour checklist verify, and what can it not prove?<\/h2>\n<p>Below is a table comparing common claims suppliers make and what a live video call can show.<\/p>\n<p>Intro: Use the table to set realistic expectations about what a factory video tour checklist can confirm.<\/p>\n<table>\n<thead>\n<tr>\n<th>Supplier claim<\/th>\n<th style=\"text-align: right;\">What a live video call can reasonably show<\/th>\n<th>What it cannot prove<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Company operates at claimed address<\/td>\n<td style=\"text-align: right;\">Exterior and interior signage, street view, reception shots<\/td>\n<td>Legal ownership, full corporate registration status<\/td>\n<\/tr>\n<tr>\n<td>Machine model and use<\/td>\n<td style=\"text-align: right;\">Visual confirmation of model plates and running machine<\/td>\n<td>Maintenance history, machine certification<\/td>\n<\/tr>\n<tr>\n<td>QC procedures exist<\/td>\n<td style=\"text-align: right;\">Inspector at work, current QC checklist view<\/td>\n<td>Long term compliance history or internal audit outcomes<\/td>\n<\/tr>\n<tr>\n<td>Product packaging standard<\/td>\n<td style=\"text-align: right;\">Packaged sample and inner protection<\/td>\n<td>Long term shipping performance or carton strength over many shipments<\/td>\n<\/tr>\n<tr>\n<td>Traceability of batch<\/td>\n<td style=\"text-align: right;\">Labels and production order snapshots<\/td>\n<td>Full chain of custody unless documents are provided and verified<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Cite the limitations and use the found evidence as part of broader due diligence [1] [2]. Record what can and cannot be concluded on your factory video tour checklist.<\/p>\n<h2 id=\"which-factory-video-tour-checklist-prompts-are-appropriate-on-a-live-call\">Which factory video tour checklist prompts are appropriate on a live call?<\/h2>\n<p>Intro: Keep the call professional and lawful by separating reasonable prompts from inappropriate demands.<\/p>\n<table>\n<thead>\n<tr>\n<th>Acceptable prompt<\/th>\n<th>Why it is reasonable<\/th>\n<th>Inappropriate request<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Show machine serial number and nameplate<\/td>\n<td>Confirms equipment identity without exposing secrets<\/td>\n<td>Ask for machine purchase invoices or supplier banking details<\/td>\n<\/tr>\n<tr>\n<td>Measure a finished part on camera<\/td>\n<td>Immediate confirmation of dimensions<\/td>\n<td>Request proprietary drawings from other customers<\/td>\n<\/tr>\n<tr>\n<td>Show a batch label or production order<\/td>\n<td>Helps trace date and raw material lot<\/td>\n<td>Ask to reveal another customer name or order details<\/td>\n<\/tr>\n<tr>\n<td>Film the mold ID and tag<\/td>\n<td>Confirms tooling for the part<\/td>\n<td>Request to view closed customer molds in detail if customer confidentiality applies<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Remote assessment guidance recommends respecting privacy and not asking for confidential customer data while capturing sufficient evidence to test claims [2]. Add any improper requests to your factory video tour checklist as a note.<\/p>\n<h2 id=\"how-should-you-use-a-factory-video-tour-checklist-scoring-table\">How should you use a factory video tour checklist scoring table?<\/h2>\n<p>Intro: Use this printable table to score each field during or right after the call.<\/p>\n<table>\n<thead>\n<tr>\n<th>Campo<\/th>\n<th style=\"text-align: right;\">Verified (2)<\/th>\n<th style=\"text-align: right;\">Partial (1)<\/th>\n<th style=\"text-align: right;\">Not verified (0)<\/th>\n<th>Notas<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Consent to record<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Entrance signage matches documents<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Production line visible and active<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Machine serials shown<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Incoming material labels<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Mold\/tool identification<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>QC live measurement<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Packaging sample opened<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>Traceability documents shown<\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td style=\"text-align: right;\"><\/td>\n<td><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Fill this factory video tour checklist during the call. Keep notes about who said what and timestamp critical shots for later review. A signed and dated factory video tour checklist page improves traceability.<\/p>\n<h2 id=\"frequently-asked-questions\">Frequently asked questions<\/h2>\n<p>Q1: Can a live video replace an on site audit?<br \/>\nA1: No. Remote checks help validate claims and gather evidence but they do not replace an on site audit for full <a href=\"https:\/\/sourcingall.com\/es\/how-we-work\/\">assurance<\/a> [1].<\/p>\n<p>Q2: Should I record the supplier video call?<br \/>\nA2: Yes if you obtain explicit consent at the start of the call and respect any privacy or proprietary limits the supplier sets.<\/p>\n<p>Q3: What if the supplier offers only pre recorded video?<br \/>\nA3: Ask for a live follow up or request time stamped footage and multiple angles. Treat pre recorded clips as lower trust until you see live verification.<\/p>\n<p>Q4: Can I ask the supplier for machine serial numbers?<br \/>\nA4: Yes. Asking for a machine nameplate or serial number is a reasonable verification prompt. Do not request bank or confidential customer data.<\/p>\n<p>Q5: What are common red flags during a factory video tour?<br \/>\nA5: Signs include heavy editing, inconsistent signage, missing QC stations, and refusal to show simple evidence such as machine nameplates or packed samples.<\/p>\n<p>Q6: How long should a first video tour last?<br \/>\nA6: A 20 minute focused session is a practical default for a first order check. You can expand time if the product is complex.<\/p>\n<p>Q7: What if the supplier refuses to let me record?<br \/>\nA7: You can still proceed but log the refusal and require additional documentary evidence or a pilot order to reduce risk.<\/p>\n<p>Q8: Is it okay to ask the inspector to measure a part on camera?<br \/>\nA8: Yes. Live measurement is a common and reasonable prompt to test tolerances and QC practice.<\/p>\n<p>Q9: How should I store the footage and notes?<br \/>\nA9: Store recordings, timestamps, and your scoring table in a secure folder with any related documents for later cross checking.<\/p>\n<p>Q10: When should I request a third party audit?<br \/>\nA10: For high value or high risk orders, or when remote evidence is incomplete or inconsistent, consider commissioning a local third party audit.<\/p>\n<p>If you keep answers to these FAQs with your factory video tour checklist you can reduce repeated work on follow up calls.<\/p>\n<h2 id=\"related-reading\">Related reading<\/h2>\n<ul>\n<li>https:\/\/sourcingall.com\/china-sourcing-services\/<\/li>\n<li>https:\/\/sourcingall.com\/how-our-china-sourcing-process-works\/<\/li>\n<li>https:\/\/sourcingall.com\/china-sourcing-faqs\/<\/li>\n<li>https:\/\/sourcingall.com\/request-a-quote\/<\/li>\n<\/ul>\n<h2 id=\"references\">Referencias<\/h2>\n<ol>\n<li>ChinVerify, &#8220;How to Run Due Diligence on a Chinese Supplier.&#8221; https:\/\/www.chinverify.com\/en\/how-to\/how-to-perform-due-diligence-on-a-chinese-supplier [1]<\/li>\n<li>Agroknow, &#8220;Travel restrictions &amp; supplier audits: how to perform a remote assessment,&#8221; May 22, 2020. https:\/\/agroknow.com\/fsqa-digital-transformation\/travel-restrictions-supplier-audits-how-to-perform-a-remote-assessment\/ [2]<\/li>\n<\/ol>\n<p>A focused factory video tour checklist will make live supplier calls more useful. Use the evidence from the call together with records, document checks, and targeted follow up to decide whether to proceed with a pilot order, require an on site audit, or move to another supplier. Keep the completed factory video tour checklist in your supplier file for future reference.<\/p>","protected":false},"excerpt":{"rendered":"<p>A minute-by-minute factory video tour checklist with exact shots, live prompts, red flags, scoring, and a post-call decision matrix for first orders.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"rank_math_internal_links_processed":["1"],"_uag_page_assets":["a:9:{s:3:\"css\";s:263:\".uag-blocks-common-selector{z-index:var(--z-index-desktop) !important}@media (max-width: 976px){.uag-blocks-common-selector{z-index:var(--z-index-tablet) !important}}@media (max-width: 767px){.uag-blocks-common-selector{z-index:var(--z-index-mobile) !important}}\n\";s:2:\"js\";s:0:\"\";s:18:\"current_block_list\";a:15:{i:0;s:11:\"core\/search\";i:1;s:10:\"core\/group\";i:2;s:12:\"core\/heading\";i:3;s:17:\"core\/latest-posts\";i:4;s:20:\"core\/latest-comments\";i:5;s:13:\"core\/archives\";i:6;s:15:\"core\/categories\";i:8;s:25:\"greenshift-blocks\/heading\";i:9;s:22:\"greenshift-blocks\/text\";i:10;s:14:\"core\/paragraph\";i:12;s:18:\"core\/legacy-widget\";i:13;s:17:\"core\/social-links\";i:15;s:16:\"core\/social-link\";i:16;s:21:\"trp\/language-switcher\";i:17;s:9:\"core\/html\";}s:8:\"uag_flag\";b:0;s:11:\"uag_version\";s:10:\"1788080412\";s:6:\"gfonts\";a:0:{}s:10:\"gfonts_url\";s:0:\"\";s:12:\"gfonts_files\";a:0:{}s:14:\"uag_faq_layout\";b:0;}"],"_uag_css_file_name":["uag-css-3082.css"]},"categories":[33],"tags":[],"class_list":["post-3082","post","type-post","status-publish","format-standard","hentry","category-supplier-verification"],"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"trp-custom-language-flag":false},"uagb_author_info":{"display_name":"admin","author_link":"https:\/\/sourcingall.com\/es\/author\/admin\/"},"uagb_comment_info":0,"uagb_excerpt":"A minute-by-minute factory video tour checklist with exact shots, live prompts, red flags, scoring, and a post-call decision matrix for first orders.","_links":{"self":[{"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/posts\/3082","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/comments?post=3082"}],"version-history":[{"count":1,"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/posts\/3082\/revisions"}],"predecessor-version":[{"id":3188,"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/posts\/3082\/revisions\/3188"}],"wp:attachment":[{"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/media?parent=3082"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/categories?post=3082"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sourcingall.com\/es\/wp-json\/wp\/v2\/tags?post=3082"}],"curies":[{"name":"gracias","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}